Plan corrections.
Jul 14, 2008 16:58:53 GMT -3
Post by vmrod on Jul 14, 2008 16:58:53 GMT -3
Page 6:
Part #UCA-1: left-most radius (on outside edge of plate) to be R.1.338", (not R.1250"). Doesn't really matter though.
Part #UCA-2 and UCA-3 to be 1"O.D. x 0.125" steel tubing.
Part #UCA-1: left-most radius (on outside edge of plate) to be R.1.338", (not R.1250"). Doesn't really matter though.
Part #UCA-2 and UCA-3 to be 1"O.D. x 0.125" steel tubing.