|
Post by vmrod on Feb 13, 2009 15:34:07 GMT -3
|
|
|
Post by vmrod on Jun 28, 2010 14:32:30 GMT -3
To control the air bags, I used (2) 1/4" brass solenoid valves. They are tubed up per the diagram below. ('S1' & 'S2' represents solenoid valves)
air supply v | | Vent <-----S2---+---S1---+--- Air Bag | - future pressure sensor connection
As a note to others, you would easily have enough pressure if you would use 1/8" brass solenoid valves. The price is not much cheaper, but if this is what you have, go for it.
|
|